Integration Engineer (UAV Platforms)

About the role

Integration Engineer (UAV Platforms) / Інженер з інтеграції БпЛА (БПЛА)

ABOUT THE ROLE

We build Osiris, an optical navigation module for unmanned aircraft. Our customers are UAV manufacturers and operators who need Osiris flying on their own airframes, quickly and reliably.

You are the person who makes that happen. You will take Osiris from a box on a bench to a working, calibrated, flight-tested module on a customer's fixed-wing aircraft. That means handling the mechanical fit, the wiring, the flight controller configuration, and the testing that proves it works. When a unit comes back faulty, you are also the person who finds out why and fixes it.

This is a hands-on role. You will spend your time with hardware, a laptop, and a soldering iron, not in a design review. Expect regular travel within Ukraine to customer facilities and test sites.

IN THIS ROLE YOU'LL GET TO:

- Integrate Osiris onto customer UAV platforms: mechanical mounting, power, wiring harnesses, and data links to the flight controller.

- Configure and tune ArduPilot (and other flight stacks) for correct interoperation with Osiris: MAVLink routing, serial port and telemetry setup, parameter configuration, failsafe behaviour.

- Calibrate Osiris units (optical and sensor calibration) and validate system performance on the bench and in flight.

- Diagnose and repair faulty units in the field and on the bench: fault finding, cable and connector repair, module replacement, and verification that the unit meets spec afterwards.

- Join ground and flight test campaigns and analyse the results on site: pull and review ArduPilot and Osiris logs between flights.

- Give the customer and our engineering team clear, immediate feedback during testing, not days later: what worked, what did not, and what is causing it

- Diagnose issues down to the root cause, whether that is a loose connector, an EMI problem, a parameter, or a software bug.

- Produce test reports after each campaign: what was flown, what the logs show, what failed and why, in a form the customer and our engineers can both use.

- Act as the technical point of contact for customer engineering teams: answer questions, train their staff, and write clear integration guides and wiring documentation.

- Feed field findings back to our engineering team so the product gets easier to integrate over time.

- Prepare and maintain integration kits, cabling, and test equipment.

MUST HAVE REQUIREMENTS:

- Languages: Fluent Ukrainian and working English. You will read English technical documentation daily and communicate with an international engineering team.

- ArduPilot: Practical understanding of ArduPilot/PX4. You have configured a flight controller, set parameters, worked with MAVLink, and read a flight log.

- Electronics: Solid grasp of practical electronics. Comfortable with schematics, connectors, power distribution, serial interfaces (UART, I²C, SPI, Ethernet), and using a multimeter and oscilloscope to find a fault.